Bird Playing Field - T Cap stepper
1,073
views
28
downloads
7
collections
0 comments
Loading comments... 
Bird Playing Field - T Cap stepper
3D
Published 2020-08-11T11:30:20+00:00
4
0
Add to Collection
Description
A part of a bird playing field I've designed. There are important things you should know before printing these for your bird. Please read carefully.
Bird Safety!
- There is no guaruntee that you will print these models with bird-safe filament nor machine. These models are considered "Supervised toys". You have to stay with your bird while they play with these models.
- Do not let your bird chew on them. A bit of curious nibble is ok, but a passionate chew to pieces is not.
- Do not coat it with anything especially spray paint. If you have to post-process it, only do sanding and/or annealing. Wash thoroughly after.
About the models
- This is part of a collection of prints. Download and print only the item you need.
- Check the entire colelction at https://www.myminifactory.com/users/jarnMod/collection/jarnmod-s-bird-toys-collection
- This model is the T-Cap stepper
- It is a cylindrical ladder step which a bird can perch on. Designed to be connected to poles with various heights. This should make a kind of ladder that your bird can parkour around
- There are a bit of neuance in printing it. Please check print details. This is important.
License
Printing Details
0.2 - 0.28 Layer height
Important print detail
This print requires a support.
Yes, I know you can print it without support. I've tried it and it does print but with the flat part easily visible to the bird, it becomes a tempting target for them.
So, it is best to print with support. Print it T up. Let the flat seems stay under the step so the bird cannot bite the weak spot.
Technical Information
| Date published | 11/08/2020 |
| Time to do | 96 - 130 minutes |
| Material Quantity | 16g |
| Dimensions | 80x20.8x32.8 |
More Information
Object Parts