BMO Case
BMO Case
Published 2020-10-29T12:30:41+00:00
THIS IS A DEMO VERSION, YOU CAN FIND THE FULL VERSION AT
https://www.aguilarworkshop.com/product-page/bmo-case
OR READ MORE ABOUT IT HERE
https://www.aguilarworkshop.com/post/__bmo
Major Features
Raspberry Pi/Touch Screen Compatibility
The three major components required to make this BMO work are a Raspberry Pi (I used a 4), this display from Amazon (Has touch screen functionality if you want it), and this HDMI L Adapter that is required to be able to connect the screen to the Pi in the tight confines of the BMO casing. The display comes with a 5V cable that can connect it to the Pi's 5V pin for power (with a male/female cable extensions), this means only the Pi power cable is required.
Standardized Assembly
All electronics as well as the back plate are designed to be fastened with M3 bolts.
Power Cable and GPIO Opening
There is an opening for the power cable as well as male/female GPIO cable extensions.
BMO Stencil
Included, is a stencil that centers itself on the case so that you can paint "BMO" on the case.
No Supports Needed, Two Piece Design
No Supports are necessary on any piece of this model. The case itself prints in two large parts.
Date published | 29/10/2020 |
Support Free | YES |