This is a Boss Aluminium Style Tray and Canopy for the Boom racing BRX01.
It's made for our Land Cruiser Double Cab Conversion for the Killerbody LC70 Body (KB48601).
You can screw the Tray directly to BRX01 but you need to convert the rear Suspension with the optional Aluminium Crossmember (BRLC7064B) for the BRX01.
Or you convert the BRX01 to Rear Leaf Springs.
This Set includes every STL File you need to print the Tray, the Canopy and the Roof Rack.
The Boxes and the Drawer can be opened.
Around 160mm of 1mm spring steel wire (or something similar) for the hinges of the Canopy and the Side Boxes.
8x M3x5-6mm Flat Head Screws for the Fender
4x M3x6-8mm Screws for the Boxes
2x M3x15mm Screws for the back wall of the Tray
8x M3x8-10mm Flat Head Screws for mounting the Canopy to the Tray and for the Roof Rack
12x 5x2x2,5mm Magnets for the Boxes and the Canopy
INCLUDED STL FILES:
Boxes with Cover R and L
Drawer for the Tray
Fender R and L
Canopy with Cover
Spare Tire Cover Dummy
NOTE: The ladder shown on the renderings is not part of this Set.