Butterfly Lampshade / Wind Protector
$4.99 Butterfly Lampshade / Wind Protector
Published 2018-11-27T13:33:49+00:00
We designed this lampshade using Z-Brush and an AI to make all details printable without support. The lampshade is 18cm tall and has 12cm diameter in the middle. The smallest inner opening is 7.5cm in diameter so that you can comfortably fit one of those small outdoor battery LED lights in. With the right material, the resulting lampshade is also heat-resistant so that you can use it as a wind protection for candles :)
BTW, we have hollowed-out the thickness from within to save print material and make the shine-through effect stronger. As a result, the inside of this object looks like a blurry version of the outside engravings.
Our objects are meant for hobbyists/enthusiasts like us. But we also own a design company, so contact us if you're interested in a commercial license.
This object prints fine without any retractions and any support on my Ultimaker 2 with 250deg filament and 100deg buildplate and the 3dkTOP material. That one, BTW, is also foodsafe and heat-resistant. Here's the Cura settings that I used for the white print on the photo: https://gist.github.com/fxtentacle/96ca578d9c0127ff3d6548e90710773f
Date published | 27/11/2018 |
Price | $4.99 |
Time to do | 1340 - minutes |
Material Quantity | 145g |
Dimensions | 120mm x 120mm x 180mm |
Support Free | YES |