Camera Wall attachment
Camera Wall attachment
3D
Published 2018-04-03T10:01:13+00:00
A few months ago I came up with this design only for my own home... now it's time to share! I personally use it for storing my Camera equip at home. It's practical to have a own place for these things and get the Camera away from your desk! i can imagine it is also nice as a design element in your hobby/living room!
The design is made for the mounting plate of the rollei traveller tripod. (arca-swiss compatible) If your mounting plate doesn't fit or you dont have any you can print my design: here
Otherwise I would appreciate to see your creations on this platform.
What you need: 2x countersunk screws (max. outer ø 5mm) you can get it from any DIY-Shop. If you have a wall out of stone you will need dowels for better grip.
Stability: I only tried with my Nikon d5100+Lens ~1.2 kg, so please be careful!
Pictures: Middle Franconia, Bavaria
- no raft/supports needed
- 0.2mm layer height
- printed in PLA/ABS/PETG
| Date published | 03/04/2018 |
| Time to do | 60 - 70 minutes |
| Material Quantity | 15g |
| Dimensions | 84mm x 45mm x 15mm |
| Technology | FDM |
| Complexity | Very Easy |
| Support Free | YES |
