Case for DC-DC Converter Adjustable Step-Down Module
Case for DC-DC Converter Adjustable Step-Down Module
3D
Published 2018-03-07T14:57:45+00:00
Case for adjustable DC-DC stepdown converter with display (like this: https://ru.aliexpress.com/item/Free-Shipping-Electrolytic-capacitor-50v2200uf-50V2200-50PCS/1258173179.html). PCB dementions 60mm * 37mm.
I'm soldered a new 17mm-height buttons instead defaults.
The board is held by the screws housing. Using 3,0mm*20mm screws.
Holes for 2mm diameter wires, but you can use more thicker, just break a "wire separator" in bottom part.
if you do not need any symbols on top cover - use "top_clean.stl". (rotate top cover to 180 degrees)
----------------
Top_v2:
Changed sides of "+/-" in voltage regulator. I made a mistake, when designing it.
Printer:
Anycubic i3 Mega
Supports:
No
Resolution:
0.3
Infill:
For greater strength of screws holes - use 100%
| Date published | 07/03/2018 |
| Material Quantity | 6,6m; 19g |
| Dimensions | 68mm * 45mm * 21.9mm |
| Technology | FDM |
| Complexity | Easy |
| Support Free | YES |