3D Printable Mood lamp model for Electromaker kits competition. All parts are separately designed so that printing can be done as separate parts else a single object as per our wish. The Lamp consists of a base cover, base, stem, holder and shade. Chip for controlling LED is placed in the Base part. In which provision for a fitting button, power cable and source cable are provided. After placing the control units it is covered by the base cover which is screwed by ISO Metric thread of 2mm Tap with 15mm length. The stem is fixed by using hot glue. And then LED strip is placed in holder and holes are provided for fixing. Shade covers the holder by fixing it with glue to the stem. At the center of all parts there is a hole provided for wiring. The model is designed as user-friendly and easy printability. There will no need for printing support. The overall size of the project is 116x116x314mm. Electrical items are not provided and they are available in the market and online.