Clip 'Vacuum Cleaner Rod'
Clip 'Vacuum Cleaner Rod'
3D
Published 2018-07-23T14:30:22+00:00
A handy clip to carry an extra vacuum cleaner accessory with you while vacuuming.
Some accessories of your vacuum cleaner do not fit in the appliance itself.
Once vacuuming, this accessory often remains lying down, making it less or not used.
A brush set, for example. Carry it with you and change it for the normal vacuum cleaner
mouth and damage your fitment less quickly while removing dust.
This clip is suitable for a Ø35mm vacuum cleaner rod with a Ø40mm accessory.
I added a FreeCAD file to alter this object.
🎞 Video: https://youtu.be/BwWVrhJ-5t8
⚠ Usage of any models from 3DParts4U will be at your own risk!
⚙ My PLA Simplify3D print settings:
- 3600mm/minute (60mm/second)
- hotend 185°C | bed 50°C
- 250 micron | infill 20%
- 3 top layers | 3 bottom layers | 4 outline layers
- brass nozzle 0.35mm
- extrusion width 0.44mm
- retraction 1.00mm
- extrusion multiplier 0.95
- coasting 0.30mm
- wipe distance off
- fan 100%
- no support needed
| Date published | 23/07/2018 |
| Support Free | YES |