Core P3 Glass Block_v2_M3
Core P3 Glass Block_v2_M3
Published 2020-07-16T10:18:36+00:00
Panel Mounting Block for Core P3 Case.
This is a Block you can add to the Core P3 Case to mount Acrylic panels to mimic a Smaller Core P5 Case.
It has the proper holes for a Brass M3 Insert commonly found on Amazon, use with a M3 Thumbscrew
Use a solidering iron to slowly press fit the M3 Inserts into the printed holes in the Block
Look for my other print of the Support legs for v2 which has the M3 insert as well fore the lower front
https://www.myminifactory.com/object/3d-print-core-p3-glass-support-127464
Brass Insert Info:
M3 information: Thread Pitch: M3-0.5
overall length (OAL) 3.85mm
OD (top) 5.6mm
OD (bottom) 5.12mm
Use a solidering iron to slowly set the brass insert into the base
25% infill PETG or PLA
You will need three blocks total two top and one bottom
Date published | 16/07/2020 |