I recently bought a phillips hue starter kit with three bulbs that can light up in every color. I did not want to buy the expensive wall mounts, so i decided todesign my own. They look fabulus when illuminated, especially with a dynamic theme.
I made three options for the top part of the lamp, you can easily make your own by taking´corner lamp top´ or ´corner lamp simple´ into meshmixer and use the ´make pattern´ tool or any other cool feature to customize your lamp.
This lamp is designed for an E27 socket and an phillips hue color ambiance bulb, but all E27 bulbs with a diameter less than 40mm should fit. The lamp is mounted on the wall with a single screw or nail and can be easily removed.
What you will need:
- about 200g of filament
- E27 socket
- LED Light Bulb
- Wire with a diameter less than 6mm
This project involves working with main voltages. You will need to wire the socket on your own, only do this if you are familiar with working with main voltages.
Also this lamp is 3D printed (who would have thougt) therefore it consists of plastic and is flammable. Only use LED bulbs with it. Keep in mind that LED bulbs also heat up while in use, select one that will not touch the printed parts and stays under 70°C during use.