Crawler 4320 (Ural 4320 Replica) - 1/10 RC BODY
$12.00 Crawler 4320 (Ural 4320 Replica) - 1/10 RC BODY
3D
Published 2022-05-26T08:44:27+00:00
UPDATE: There is now a "High Clearance Version" of the 4320 Single Cab included made specifically for the TRX4 and TRX6, which allows for more space for the shifting servo and rear diff lock servo. If you find the cab hitting the chassis, this will also allow for more space to clear the chassis and its components.
Likewise if you are planning to use the 4320 DC Expedition Cab with the 4320 Single Cab on a TRX4 chassis, we've also included mounts to make that work. Please note that the mounts will only work for the TRX4's 324mm wheelbase. (i.e. TRX4 Sport or other 313mm wheelbases will not fit using these mounts)
Similar to the “Crawler 4320 DUAL CAB” RC body we've made
This one also comes with many accessories and addons. Most of the accessories are shared with the Dual Cab and are therefore cross compatible. The 4320 was originally designed to use a 6x6 drivetrain, however this body is ambiguous so it works for both the 6x6 and 4x4 chassis.
If the 4x4 chassis is selected, then a wheelbase of 420mm with tyre height of 120mm and tyre to tyre width of 230mm should be used for true scale proportions. This being a single cab rather than a double, the standard 313mm or 12.3in wheelbase will not look too out of place.
Scale drawn diagrams of 420mm, 353mm, and 313mm wheelbases are uploaded to help you decide which wheelbase is suitable for your build.
In order to use the 4320 single cab body with this Expedition Cab (sold separately), a minimal wheelbase of 324mm is recommended. 313mm will make the front wheel very close to the fender when turning. However it will physically fit. Scale diagrams for those are also shown in the pictures. Please note that you will still need to design and use your own mounts when building this configuration.
With a 6x6 chassis, it would look like a standard “4320” off road truck. We’ve included a scale drawn diagram for Traxxas’s TRX-6 wheelbase.
Assembly instructions:
Can be found here
Designed to be printer friendly, the parts come in a variety of included options.
Cab:
- Cab full (requires a printer that can print a minimum of 385x175x165mm.
- Cab split version (comes in 3 parts. The cab, roof, and flanks. Requires a printer that can print a minimum of 125x175x150mm.)
- Cab side panels (comes in 2 varieties. The vented version can be fitted onto both sides of the cab. A special version for the right side is also included specifically for use with the air filter.)
Bonnet:
- Bonnet bump (bump version has the engine clearance bump and is more accurate to real life)
- Bonnet smooth (doesn’t have the bonnet bump)
Fender:
- LED version (has cable routing for 3mm LED light for fender indicator light)
- Standard version (Does not have routing, does not have hole to fit 3mm LED light for indicator light. Still allows the cab light bucket to be fitted)
Bumper:
- Blank number plate (hides the 2x bumper mount screws and gives a clean look)
- Logo number plate (ahead RC’s logo on the front. Hides bumper mount screws)
- Custom number plate
- Bumper mount (there are 6 different bumper mounts included)
Accessories:- Cab side handles (3 types of handles available to mount to the side of the cab)
- Air filter (Can be fitted with the included “mushroom” air filter part)
- Horn (3 styles of horn to choose from)
Some files will need to be printed twice, this includes the following:
Bonnet Latch
Fender light bucket
Fender headlight lens
Fender blinker light bucket
Fender blinker lens
Fender light
Door handle (print a total of 2)
Cab light (print a total of 3)
Accessories cab handle (whichever version you chose, double it)
Bumper hook
Cab hinge
A .zip file containing all the print files is also included for convenience. DXF files for the door and rear windows are also included.
(The wheel hub caps are not included)
We did a Dual Cab version of the build using a custom stretched Axial SCX10 iii chassis. Learn more about this awesome build here! Or check out the Dual Cab here!
*It is highly recommended to read the instruction manual before purchasing, to ensure you have all the required tools and hardware to assemble this body.*
Should you need any help, please do not hesitate to contact us!
FDM printing:
Requires a printer that can print a minimum volume of: 155x175x150mm.
PLA+ filament
0.3mm layer heights
10% infill density
Supports are necessary
| Date published | 26/05/2022 |
| Price | $12.00 |
| Dimensions | 305*230*178mm (All parts assembled including bumper) |
| Technology | FDM |