Cube Box
Cube Box
3D
Published 2020-11-02T15:20:15+00:00
Here is my new created Box Cube
Read this before you print :
-print all parts
12 poles (brim or raft optional)
3 Walls (left , right , center )
1 back Wall
1 Top
1 Bottom
support does not require
you can glue this all parts togehter, not recommand
clean all the print parts
you can print this in 0.2 and 0.3 (0.4 or higher not testet)
And here comes the special tricky part
print the walls without top and bottom layers (lok the pictures in the gallery) , print only with the infill .
the best results is the infill honeycomb or however you want.
glued the walls on the cube and you have finished a great cube
https://www.youtube.com/watch?v=etIc7Zix0FU
Attention is an work in progress , bugs and troubles are maybye
Read this before you print :
-print all parts
12 poles (brim or raft optional)
3 Walls (left , right , center )
1 back Wall
1 Top
1 Bottom
support does not require
you can glue this all parts togehter, not recommand
clean all the print parts
you can print this in 0.2 and 0.3 (0.4 or higher not testet)
And here comes the special tricky part
print the walls without top and bottom layers (lok the pictures in the gallery) , print only with the infill .
the best results is the infill honeycomb or however you want.
glued the walls on the cube and you have finished a great cube
https://www.youtube.com/watch?v=etIc7Zix0FU
Attention is an work in progress , bugs and troubles are maybye
| Date published | 02/11/2020 |
| Dimensions | 130x130x130mm |
| Support Free | YES |