DBM RC M10 SNOWBLOWER
$35.00 DBM RC M10 SNOWBLOWER
3D
Published 2022-01-01T12:05:38+00:00
M10 SNOWBLOWER BY DBM
10 Inch Wide
The goal is to make a snowblower really effiecient, reliable and also low cost.
Every comments and suggestion is highly appreciate.
the Blower come with the SCX10 V2 and TRX4 mount
Update 21-10-2023 : Add press fit adapter for servo that dont have different adapter, updated Tambour V3 for better bearing fit and left side too, added clearance for bolt on left side and right side for bolt that hold the auger. Add the 5mm to 3.175mm shaft motor adapter
Update 09-09-2023 : Add the Scx10 v2 mount , add the belt driven possibilty, minor change in tolerance for better printer selection
You have the choice with the direct drive motor or belt drive
you have the choice with the micro servo on the chute or manual rod
You will need to complete:
1x Motor with really low kv rating such 1000kv or less
https://www.horizonhobby.com/product/480b-bl-outrunner-motor-960kv-reverseshaft/EFL4716.html
1x Motor for belt drive only Max 3670 motor and Max 2500Kv if you're using the 16T belt pinion
1x Esc 30amp minimum
https://www.horizonhobby.com/product/30-amp-3s-4s-telemetry-esc-conscendoevolution/EFLA1030E.html
1x hex kit for 5mm shaft if direct drive motor is selectioned
https://www.horizonhobby.com/product/prop-adapter-and-spinner-set-radianpro/EFL1018.html
1x servo motor 270deg (no need to modify the servo to turn 360deg but you can if you want)
https://www.amazon.ca/-/fr/ZOSKAY-num%C3%A9rique-voitures-t%C3%A9l%C3%
A9command%C3%A9es-%C3%A9chelle/dp/B07Q3Y3T7J/ref=sr_1_6?crid=3V9O7C6T00025
&keywords=20+kg+270+degree&qid=1640977821&sprefix=20kg+270%2Caps%2C86&sr=8-6
3x spring pin 3/16 dia. x 9/16 lg or 3x bolt M5 with the head cut
https://www.fastenal.com/products/details/64137
1x pinion gear 32p spline 12t (optional)
1x 16t or 20t GT2 pinion for belt operation (recommended 16T)(optional)
1x 200mm GT2 belt (optional)
6x bearing 5 x 11 x 4
1x bearing 17 x 26 x 5
4x bearing 12 x 18 x 4
1X bearing 20 x 27 x 4 (optional) Belt drive system
1x assortment kit M3 screw or kit with M3,M4,M5 with enough M3
https://www.cafr.ebay.ca/itm/151896165844?var=451085277370
1x steel rod 5/32 dia. x 9 13/16 lg. Brass or Stainless work great too
1x steel rod 3/16 dia. x 2 7/8 lg. Brass or Stainless work great too
How to print:
all moving parts : 80% infill and 1.2mm to 1.6 mm wall thickness
all body parts : 20% infill and 1.2mm of wall thickness
some parts require support (name_sp)
some parts require flex material (name_flex) (you can aslo print in rigid plastic)
all moving parts : 80% infill and 1.2mm to 1.6 mm wall thickness
all body parts : 20% infill and 1.2mm of wall thickness
some parts require support (name_sp)
some parts require flex material (name_flex) (you can aslo print in rigid plastic)
CAN BE BUILT ON 200 X 200 BUILT PLATE
Tested on a Creality CR6-SE, Prusa MK3S+ and Bambu lab P1S/P1P
| Date published | 01/01/2022 |
| Price | $35.00 |
| Time to do | 1150 - 3000 minutes |
| Technology | FDM |