Destiny 2 Warmind Magnet
Destiny 2 Warmind Magnet
3D
Published 2020-09-28T11:56:20+00:00 • Remixed from Destiny Warmind Token
this is a lazy remix of Owen Barth's amazing Warmind Token - i printed the original and was so fond of the result i actually glued a metal disk to wear it on my sleeve with a magnet. that didn't go very well, so i decided to make a better model for that purpose.
this is basically the original token scaled to 110% with a round hole for 1.26x1/8" (32x3.2mm) magnet.
thank you Owen!
here's how i printed the one in the picture:
- cheap-ass black PLA
- 0.1 resolution
- 25 mm/s speed
- 100% fill density
- turn around so the logo is on top and the hole is facing the hotplate, add supports
here's the magnet i had:
https://www.amazon.com/DIYMAG-Powerful-Neodymium-Permanent-Scientific/dp/B07R1Z2WJT
just glued it in with loctite super glue =)
| Date published | 28/09/2020 |
| Time to do | - 430 minutes |
| Material Quantity | ~3m / 9g |
