DIN-Rail Storage | ER32 Collets
DIN-Rail Storage | ER32 Collets
Published 2021-02-24T09:55:29+00:00
This ER32 collet storage rack is part of a series of models I made to organize my workshop. At the moment I have storage brackets available for ER collets BT30 toolholders and Morse taper toolholders. I will add more in the future when I need them or when there are a lot of peole that would like to have a specific model. There are a few things to consider when making these, I strongly recommend to watch the video I made about these brackets before making them yourself. The video also gives an overview of the available models.
https://www.youtube.com/watch?v=IuAbfA6BLh8
You are free to download and make these models for personal usage but not to sell without my concent. If you are interested in selling these please contact me and we may be able to work out some deal.
Large one is 200x125x40mm
small one is 104x125x40mm
Recommended orientation is with top face on the printbed. It can be printed without support this way and it will give you the best looking finished part. In this orientation it will also be the strongest it can be.
Before printing be sure that the printer calibration is correct and precise. Because of the size of the print it will otherwise give a larger chance of corner lifting and visual defects of the finished part.
I made these from BASF Ultrafuse PLA PRO 1 filament with great results. Other material tips:
- Use a flament with low thermal expansion.
- Don't use (semi) flexible filaments
- Make a small model when you are not sure about the strength of the filament and finished part.
- Printing in a heated chamber is not required but try to keep the temperature around the printer as stable as possible (so no open windows that can create a draft)
Date published | 24/02/2021 |
Time to do | 90 - 540 minutes |
Material Quantity | 50-125g |
Dimensions | 200x125x40 |
Support Free | YES |