Door Opener Advance
4,455
views
231
downloads
4
collections
0 comments
Loading comments...
Door Opener Advance
3D
Published 2020-04-16T19:39:26+00:00
123
0
Add to Collection
Description
Advance your contactless door opening to the next level! Designed to minimize contact with contaminated surfaces during the SARS-CoV-2 pandemic.
Update! Additional parts available here: DO Advance - Upgrade Parts
This is the advanced version of the simple door opener with an integrated cover for the hook part to avoid touching the contaminated area while carrying. It uses a folding design similar to a pocket knife:
- Locking when open - enables use of the tip to push objects
- Retention when closed - avoids contamination while carrying
- Uses hardware from typical 3d printing supplies like cylinder/cap head screws, bed level adjustment springs.
Hardware needed
- 2x M5x12 cap head srew OR 1x dome head + 1x cap head (alternative top cover provided)
- 4x M3x10 cap head to keep everything together
- 1x M3x8 as a thumb knob
- 2x M5 nuts either 3d printed (model provided) or metal
- 4x M3 nuts (optional, alternative bottom cover provided)
- 1x compression spring 5mm (from ball point pen or 3d printer bed leveling spring)
Requirements
Contactless operation of
- Door handles
- Faucets
- Light switches
- Smaller handles on cabinets etc.
Design
- Main hook with 2.5cm diameter for pullig large handles
- Pointed tip at the end of the hook for pulling small handles
- Angle cutout at the tip for pushing small objects
- Angle between hook and handle for pushing larger/heavier objects
License
Printing Details
Minimum print recommendation for FDM/FFF:
Printed in PETG:
0.4mm nozzle, 0.2mm layer height
3 Perimeters
4 Top/Bottom solid layers (rectilinear)
40% infill (stars)
Technical Information
Date published | 16/04/2020 |
Support Free | YES |
More Information
Object Parts