E3D v6 dual 4010 fan duct
E3D v6 dual 4010 fan duct
3D
Published 2022-07-11T08:34:05+00:00
Dual 4010 fan duct for E3D v6 setups
Optimized for ease-of-use and broad compatibility with different setups. If you have any requests or suggestions, leave a comment and I'll see what I can do!
Features:
- Unobstructed front, so you can see if the first layer is sticking, and can access with tweezers to remove blobs while printing
- Duct snaps on/off for quick nozzle changes and hotend maintenance. Optional zip tie for extra security
- Compact design, compatible with most extruders including E3D Titan, Bondtech BMG, and Orbiter
- Dual 4010 fans, cooling from both sides
- 40mm heatsink fan, much quieter than 30mm fans
- Prints without supports
Printed parts:
- Base
- Fan duct left
- Fan duct right
- zip tie holder (optional)
BOM:
- 6x M3 10mm screws
- 6x M2 10mm screws
- 2x 4010 centrifugal blower fans
- 1x 4010 axial fan
- Zip ties
- Line width: 0.4mm
- Layer height: 0.2mm
- Perimeters: 3
- Orientation: pre-oriented in the stl file
- Material: ABS or PETG for the fan ducts
| Date published | 11/07/2022 |
| Support Free | YES |
