Elegant Cyrcle Phone Case V2
Elegant Cyrcle Phone Case V2
3D
Published 2020-07-29T13:00:36+00:00
It is based on the geometry of a dodecagon, which allows it to maintain symmetry and resemble the characteristic circular shape of this unique and different cell phone. Precisely because of this geometry, the design allows it to stand upright, with some stability on its own when left standing (as you can see here). It also provides a comfortable grip for the hand
In the following link, you can see a video of this design: https://youtu.be/ymPp5T5XX_Y
The front and the back are joined by a fitting and require 4 screws M1.6 to become firmly joined.
Note: I had to upload the design again because I made a small change to correct a detail and I can't make the files upload correctly on the first publish.
- It only requires a small bracket in the button mechanism for higher print quality (as you can see in the attached image). You can print with a multicolor printer easily, creating different patterns, as you can see in the images. On the other hand, because of the relief protrudes, it is easy to paint.
- The most optimal way to print is in the position original position of the files and the versions that say "flat first layer". The pattern that has the design can be printed without the need for supports, as it can easily be printed as a bridge. Furthermore, this allows you to configure the bridging settings to give it a different texture.
- I recommend that the first layer of printing be no less than 0,2 mm.
| Date published | 29/07/2020 |
| Time to do | 120 - 200 minutes |
| Material Quantity | 28 grams (100% infil, PLA) |