Ender3 SportCam ArmSupport
Ender3 SportCam ArmSupport
Published 2020-04-21T16:30:12+00:00
Trying different record views with a SportCam (or action camera) for my 3d Printer, I try this ARM support. This Arm screws directly in one of the M4 Plate screws. The Arm_Lock nut adjust the high of the arm. Arm_Nut fix the position.
Maybe you will have to replace the M4 screw, go for 55 to 60 mm flat heat screw, will be a good option.
For the Large and Short Screw Handle, you may need a M4/ 25 to 30 mm Flat head screw. Then just adjust the best position and start to record.
Also you can use this Arm (Stick, support), at any place. The case mount have a generic Sport Cam adaptor. So you should be able to attach to any other, Stick, tripod or support.
Consider just a feew lines of wall, I use 0.8, so that gives you between inner and out wall a total of 1.6mm. Four layers for Top and Buttom.
Date published | 21/04/2020 |
Time to do | 368 - 369 minutes |
Material Quantity | 42gm |
Dimensions | 230 |