Fey Tree House
$12.00 Fey Tree House
3D
Published 2018-09-06T11:37:19+00:00
Fey Tree House.
By Iain Lovecraft, 'Watchers in the Wood'.
3d Printable(3DP) 28mm scale.
The model is 3D printable and comes in three main pieces(with interior space), and three optional pieces. Requires no supports. Comes standard as 28mm but can be scaled to 15mm and up.
"Deep in the woods, with its rickety wooden roof sticking slightly out of the treeline, you could just about see the inconspicuous structure, although the stove chimney they had stuck out of the side of the hut, was indeed a dead giveaway to their presence. What could they do, it got cold in those long winter nights and ever since the forest dragon had decided to roost and lay an egg under the tree, it was difficult to come and go. Summer would bring better times, their only concern now was to watch out over the northern frontier, far away in the horizon, as the high elves had entrusted to them. They had not come for many a year, but if they did, the watchers in this hut would be the first to know."
The printed model in the photo shown, was printed at a layer high of 0.15 with a 0.4 nozzle, infill 10% PLA.
This model will benefit greatly from a small Z layer height setting to capture all the vertical detail. Although the model above was tested printed at 0.15 layer height, it is recommended that you print this between 0.04 and 0.1 (100 microns) layer height.
| Date published | 06/09/2018 |
| Price | $12.00 |
| Support Free | YES |
