Flexy Atlantean Dragon
$6.00 Flexy Atlantean Dragon
Published 2022-02-24T09:19:35+00:00
Atlantean Dragon is inspired by the animated movie Atlantis. I've always loved how the lava looked when it covered the protective dome around the city and started to crack with the blue light shining through.
They are very flexy and are 26in long at 100%! The smaller one is 23in long.
**Included is both a curled and straight version of the dragon.
Please feel free to share images of your prints, I would love to see them! ^_^
For personal use only!
If you are interested in selling 3D Prints of my models (Files are never for redistribution in any way), visit my Tribes Page or Patreon for a commercial license and other monthly perks:
https://www.patreon.com/MysticSaige / https://www.myminifactory.com/users/MysticSaige?show=tribe
**Update** Fixed an issue where the top of the stones were touching on the back leg/body.
Update 7/28/22 - Made a larger clearance around the front leg joints to help it not fuse while printing.
Update 9/21/22 - Per a request, I rearranged the layout of the Atlantean Dragon for resin printing. There are 2 new files that are set to 153x112 and 190x117. They are about 62% and 68% of the original model. I've tested the 190x117 on a FDM printer and it printed really well at that size.
Print in Place - No supports needed!
3+ perimeters (the more the stronger it will be).
15%+ infill.
Make sure to enable bridge settings.
Great in PLA.
!! Make sure to have good bed adhesion or a brim !!
**Recommended that it's printed at 100%. Links may fuse not and work properly when printed smaller.
Date published | 24/02/2022 |
Price | $6.00 |
Support Free | YES |
Love this model and the stone like runes!