FLSUN QQ Tower Wire Guide Clip
FLSUN QQ Tower Wire Guide Clip
Published 2020-08-30T17:05:15+00:00
A 3D Printable light, durable and efficient Wire Guide Clip for the FLSUN QQ Delta 3D printer, designed to secure the wires inside the towers.
The part can be easily 3D printed, without any support, on a modern inexpensive 3D Printer. It can be printed with a variety of heat tolerant materials, including PETG, ABS, ASA and many other types of heat tolerant printable materials.
PETG works very well for this application. It is easy to print. The object should be durable, easy to maintain, and last for a long time.
PLA should be avoided because the part may be suject to temperature exceeding ~55 C (~ 130 F) during normal use of the printer, especially when printing filament such as PETG, ABS, ASA or others that require a hot bed surface.
Note: Additional plated STL files arfe included for covenience - One with 3 clips and one with 6 clips.
Recommended print settings with a .4 mm nozzle
- Layer Hight: .2 mm
- 2 perimeters or shells
- 5 bottom layers
- 5 top layers
- Infill ~20%
Assembly Instructions
1- Print a minimum of 6 clips.
2- Mount the clips to the inside of the tower cover at the desired hight to stabalize the wires.
Note: I find that 3 separate rows of clips work best for me. Therefore 9 clips in total.
Date published | 30/08/2020 |
Time to do | 40 - 350 minutes |
Material Quantity | 6 grams each |
Dimensions | 88 x 15 x 20 |
Support Free | YES |