Today we bring you another cable management solution; a customizable cable clip that attaches to poles and pipes.
This design can be customized to suit a variety of pole and cable sizes.
Not only that, this huge project comes with over 5,300 STL files ready for you to use! Please note: Due to MyMiniFactory limitations, we are unable to to upload them all here, but they are available from Thingiverse.
This design is completely free and shared under a permissive license. Your support is hugely appreciated.
Did you know?
Some of our designs cannot be found on MyMiniFactory. If you are looking for more, check out our premium projects:
OpenSCAD Customizer Options
This design has the following Customizer options:
- Material_Thickness - Thickness of the material
- Material_Height - Height of the material
- Clip_Gap_Width - Width of the clip gap (maximum cable diameter)
- Clip_Length_Angle - Length of the clip as an angle
- Clip_Direction - Direction of the clip opening
- Clip_Lip_Gap_Percent - Gap of lip as a percentage
- Pole_Diameter - The diameter of the pole
- Pole_Gap_Angle - The angle of the gap
This project comes with a huge selection of STLs. Due to MyMiniFactory limitations, we are unable to to upload them all here, but they are available from Thingiverse.
For the best grip, we recommend choosing a Pole_Diameter value that is slightly smaller than the actual diameter of the pole. For example, if your pole diameter measures 22mm, try a Pole_Diameter value of '21'.
We recommend printing this in a durable filament, such as ABS.
1.0 (2 Mar 2021) - Initial version
Recommended slicer settings:
Resolution: 0.1mm - 0.2mm
Infill: ~20% or higher if you need it to be extra durable.
Supports: Should not be required.
Rafts: Not required, unless you have adhesion issues.
The "Cable Tidy Clip" models (.stl) are licensed under the CC BY license by Code and Make.
The "Cable Tidy Clip" code (.scad) is licensed under The MIT License by Code and Make.
We are proud to offer content to you absolutely free.
We love to create free content for you. As you might imagine, it takes a lot of time. Supporters help us fund materials and equipment to create future projects and tutorials. To show your appreciation, please use the link below:
We thank you so much for your support!