Gelatinous Cube - Support Free
$2.99 Gelatinous Cube - Support Free
Published 2022-03-11T09:25:40+00:00
Humphries the Gelatinous Cube STL Files
Check out our profile for more models from The Menagerie by Arcane Hound!
FDM: Humphries the Gelatinous Cube was designed to print support free for FDM printers
SLA: Humphries the Gelatinous Cube STL files come pre-supported which includes the full Humphries the Gelatinous Cube or print Support free using Support free file
--PRINTING TIPS--
FDM:
Print on an FDM printer, NO SUPPORTS, 0.2mm height, tested and works great with PLA and PETG.
This was test printed using a 0.2mm layer height quality profile. Smaller layers should work
even better.
SLA: Print using pre-supported files or support free, use your favortie slicer. For larger prints recommend hollowing out model and be sure to support the hollowed areas.
Humphries the Gelatinous Cube is best printed using a clear translucent resin(Like green!) Highly recommend hollowing him out. Once printed,wash, and cured recommend masking off areas for paint and paint base and objects stuck in him
then use a clear UV coat over the top of him. And use a glossy finish on the green not painted areas and a matte finish on no body areas! Can also have fun my drilling a hole in bottom of base and Light him up using a small LED.
Date published | 11/03/2022 |
Price | $2.99 |
Support Free | YES |
Printed this using a translucent blue resin, apologize if the paint job isn’t the best. The sword broke off and I could not find the tip so I glued it onto the top, I also forgot to paint the eye and the hand broke off as well, which I just left out.