Gmax 2 G create 92 mm fan enclosure
Gmax 2 G create 92 mm fan enclosure
3D
Published 2020-08-07T15:35:15+00:00
hey guys, I got tired of the poor cooling solution that was provided on the gmax 2 stock enclosure. The original fan was too small and made a ton of noise, the solution that the company came up with was to add another internal fan to help keep the stepper drivers cool. Issue is the fans were not providing sufficient air and were hella noisey so i designed this case to use a 92 mm fan to provide tons of cooling all while being silent. If you take a look at the images youll see all the parts i used to make this upgrade.
the mount needs no modifications just that you uninstall the old case cover and install this new 3d printed one with a 92mm fan and make sure the connect the fan to the power supply.
when printing this make sure to use at minimum a 4 outline skirt and 0 mm ofset so that the skirt supports the print from falling over when printing.
| Date published | 07/08/2020 |
