Gopro 3D Printer frame mount
Gopro 3D Printer frame mount
3D
Published 2021-10-04T10:17:31+00:00
If you want to mount your gopro or other type of action cam with a gopro mount to your 3D printer frame for some timelapse video, then this is the mount you should choose.
There are currently 2 versions, straight version and a round version with 45 degree tilt.
What you need:
A set of thumb screw.
2 M3 bolts/screws and a holding nut.
Feel free to visit my github repo for more design. I use FreeCAD for designing so you should get the original design and do changes easily.
https://github.com/t-liu93/Home-Improvement-Mechanical-Design
You can use PLA for that but if your printer is in a closure and you are printing ABS or PETG with very high bed temperature, then choose a more heat resistant material. I used PETG.
I used 50% infill but I think less should also work.
| Date published | 04/10/2021 |
| Support Free | YES |