Göteborgs Konstmuseum - optimized for printing
Göteborgs Konstmuseum - optimized for printing
3D
Published 2021-01-27T11:49:44+00:00 • Remixed from Gothenburg Museum of Art
This is a remix of @MiniWorld's Model, designed to make it easier to 3d print.
I've modified the overhanging roof to have a maximum overhang of 45°, and I've also modified the arches, to print as bridges, instead of as overhangs.
The print still requires support to successfully print the statue.
I'd recommend printing the statue at a very slow speed, as well as being very careful when removing supports from it, due to its fragility.
0.15mm layer height.
Supports only on the statue (using PrusaSlicer's support enforcer feature).
Ironing on top layer.
Tealight for scale (3rd picture).
I've accidentally broken off one of the 4 pillars in front of the museum, which is why it looks different.
There is also a little car on the platform, which was a separate print and is not included in the STL file.
| Date published | 27/01/2021 |
| Dimensions | 80mm x 66.94mm x 26.65mm |
