Gingerbread House Base
Gingerbread House Base
3D
Published 2017-12-15T10:17:01+00:00
*****PRINT IN VASE MODE*****
Let’s face it, with population growth, lean manufacturing techniques and workforce reductions Santa is busier and more stressed than ever! Good thing one of his elves got a 3D printer. Now the gingerbread making department has a new, fast way to whip out gingerbread houses! You can help too. 3D print your own gingerbread house base, glue on some graham crackers with frosting and start decorating. Available in 2 sizes. Start with the print settings below for a fun, super fast large print!
This object was made in Tinkercad. https://www.tinkercad.com/things/6ImI0qjJ7uV
(these settings are for a FlashForge Creator Pro using Simplify 3D and print a house base in 49 minutes)
Extrusion Multiplier 1.40
Extrusion Width: Manual 0.70
Layer Height: 0.5000
Top Solid Layers: 0
Bottom Solid Layers: 0
Outline/Perimeter Shells 1
Single outline corckscrew printing mode (vase mode): checked
Default Printing Speed: 80.0 mm/s
Outline Underspeed: 50%
Solid Infill Underspeed:70%
X/Y Axis Movement Speed 90.0%
Z Axis Movement Speed 20.0mm/s
| Date published | 15/12/2017 |
| Time to do | 49 - 49 minutes |
| Support Free | YES |