guitar tuners - geared string tuner
guitar tuners - geared string tuner
3D
Published 2021-02-22T11:47:36+00:00
check out version 1.1: https://www.myminifactory.com/object/3d-print-guitar-tuners-1-1-250187
tested guitar string tuners. they work great for nylon strings, for steel strings I'd say 80%-90%. they tune nicely, but give in when the pitch is to high. so I would recommend them for nylon strings. I'll just have to make another improved version for steel strings.
I added a link to a video where I talk about the tuners. I show how they are assembled at 2:13. hopefully its clear enough.
IMPORTANT: the slots on the base, sleeve and worm drive must all be alliigned before inserting the locking pin.
If you're in a good mood you can also whatch the whole video, it helps me alot, thanks:)
support my work by subscribing to my channel: https://bit.ly/noamtsvi-sub Thanks!
orientation in photo
PETG, PLA+, ePLA-st. these are good materials I had experience with. But if you have something better, go for it.
40mm per second
the worm drive at 10mm per second
100% infill
only the sleeve needs supports, the other parts dont.
IMPORTANT: the slots on the base, sleeve and worm drive must all be alliigned before inserting the locking pin
| Date published | 22/02/2021 |
first batch