Gyro Bearing Spinner
Gyro Bearing Spinner
3D
Published 2020-09-17T20:45:16+00:00
The unltimate figet spinner spins in 3 directions at once! The result of many hours of itterating and figeting!
A remix of Tim Snow's "Gyro Bearing" so that it can actually spin with a real 608 bearing (https://www.myminifactory.com/object/3d-print-http-www-thingiverse-com-thing-1366605-28286)
The caps are Terry Tong's "608 Bearing Cap" (https://www.myminifactory.com/object/3d-print-608-bearing-cap-33795) Printed out of Prusament PETG on a textured bed to give the textured look.
The cool hexagon center comes from setting infill to 20% honeycomb and setting number of top and bottom layers to 0 (other infil designs look cool too!).
(If you're having trouble with bed adhesion i suggest shifting the whole design 1mm down to make the first layer wider.
Printed at 0.15mm layer hight and 20% infill out of 3D Solutech Marble PLA fillament
| Date published | 17/09/2020 |
| Time to do | 105 - minutes |
| Material Quantity | 14.24 |
| Dimensions | 60mm x 60mm x 8.8mm |
| Support Free | YES |