Hades/Zagreus Statue 1/6 scale
Hades/Zagreus Statue 1/6 scale
Published 2021-03-05T10:34:50+00:00
1/6 scale Hades/Zagreus statue. After assembly, it stands at around 360(L)x379(W)x451(H) mm.
I have printed and painted the statue, so all the files should be ready to go. I printed the entire statue hollowed.
The keys are designed with a 5% tolerance since the resin I use is prone to shrink/expand, so if your printer is tuned and you are using better resin, the keys may be very loose. They should still perform as directional guides, you will just probably need to glue the contact surfaces very tightly.
Below are my printing parameters:
Base -printed on stock Ender 5 (mostly due to my resin printer size limitations), at 0.08 mm layer height. Minimal sanding applied before primer and paint.
Figure and hydra- printed on Anycubic Mono X. If you have a smaller resin printer, you may need to downscale the model, as some of the hydra heads are rather large and may not fit on a smaller build plate.
Let me know if you run into any file issues or if I am missing any of the files described in the assembly pdf. Cheers.
Edit: Something seems to have happened to the file, resulting in me having to reupload some objects. It may say "under review".
Date published | 05/03/2021 |
Dimensions | 360mm x 379mm x 451mm assembled |
Took long than expected but looks amazing, looking forward to painting it.