This is a multi piece, free standing universal headphone stand. It is printed in multiple pieces so it is printable by most 3d printers with a small build volume. It was originally printed on an M3D Micro 3d printer in PLA without a heated bed. Stand is composed of 5 or 8 pieces, the base, middle extension, the top part, 2 blocks to aid in aligning the main parts for assembly, and 3 feet to increase stability. Due to various tolerances between printers, the alignment blocks are printed size on and will need to be scaled down to fit depending on your specific printer tolerances. The overall size of the stand when assembled is 11.125" with the headphone hangar portion 10.75" high. The base footprint is 3.5" x 3.75" without the feet attached to the base. With the feet attached to the base, the footprint increases to 5.125" deep by 4.325" wide. It is stable without the feet, but they will greatly increase the stability.
Can be printed with no support material depending on part orientation, but support material on the top part can help the print be successful.