HMS Implacable- SD-467 Superdreadnought
HMS Implacable- SD-467 Superdreadnought
3D
Published 2019-05-13T13:55:42+00:00
A Friend on mine wanted to know if i can update his HMS Super-dreadnought Invictus Ship for him.
So all he gave me was a Poster image and i was able to create and make his Ship.
Here is the HMS Implacable- SD-467 based on his Specs.
The group can be found here: https://honorverse.fandom.com/wiki/Superdreadnought
If you decide to print this just Mirror the Mid section then glue.
On a side note, If you want the DETAILS to pop out you will have to print this at 2 or 3 times its size. I printed this at 2x and tock 55 hours at 10% infil with .2 mm height.
This Print is 31 inches long and the detail really pops out. The only thing i did different is print the Balls that go on the Forward and Aft Sections and will be gluing them on manually.
I've added new Mid Rings for the Front and Aft Sections with better detailed outer balls
| Date published | 13/05/2019 |
| Technology | FDM |
| Complexity | Easy |