IKEA Billy Shelf Label
IKEA Billy Shelf Label
Published 2020-03-28T07:45:15+00:00
Wanted some labels for my IKEA Billy Bookcases to identify and organize my Books, DVDs, CDs, etc. The STLs are designed to be angled inward on the backside for a better secure fitting. There are 2 basic Billy Bookcase widths and the different widths(Narrow vs Standard) had different shelf thicknesses - .75" (~19mm) for the narrow version vs .80" (~20mm) for the standard version. Both side label frames are included.
For labels - create text box that is 3/4" (19mm) high and adjust width to fit length of words typed into the box. Mirror Reverse text image and laser print onto standard white paper - ink jet printing will not work.
Z-height of STL model needs to be adjusted as needed to fit length of text box before slicing. Uncheck uniform scaling so only Z-axis dimension is adjusted. Slicing should result in each layer being single filament line width.
After printing, I used my Mod Podge Image Transfer to 3D Printed Surface technique I have also posted.
Date published | 28/03/2020 |
Support Free | YES |