IPhone 5 Case Slot Pattern
IPhone 5 Case Slot Pattern
Published 2014-12-16T16:37:01+00:00
I designed this case for the IPhone 5s/5c using Solidworks.
I started by creating a pattern of slots and made the shapes smaller and more irregular as it reached the center of the case.
The case clips easily onto the phone protecting the back and the edge from scratches!
I designed it to be a fast and easy print - placed flat down onto the print bed (so the file will print as it is - without the need for support material or any extra measures).
I printed this one using an Ultimaker 2 but it will work just as well using other printers.
I used white PLA - at a layer height of 0.2mm and print speed 50mm/s with good results, as it is a fast print you could reduce the layer height further or choose slower print settings to produce a case of even higher quality!
Import the file into your printer software with the back facing down onto the print bed.
Turn off support material and you're ready to print.
The finish on the back of the case will be shinier if it is printed onto a smooth surface such as glass, printing onto other materials such as masking tape will result in more of a matte finish.
Date published | 16/12/2014 |
Time to do | 60 - 90 minutes |
Material Quantity | 20 grams |
Dimensions | 130mm x 63mm x 10mm |
Complexity | Very Easy |
Support Free | YES |