Japanese Style Boathouses (Ine no Funaya)
Japanese Style Boathouses (Ine no Funaya)
Published 2021-08-16T16:51:07+00:00
Hey! Thanks for stopping by and I hope you like it!
The Houses and Roofs were made separately to reduce the amount of filament used and to facilitate the addition of lights inside the houses.
The Interior of the houses have sufficient connected space within to add LEDs.
Modelled with Blender
Sliced using Ultimaker Cura
Printed on the Creality Ender 3
Filament used was Tesseract White Filament
Feedback will be greatly appreciated and I'm willing to make changes/fix flaws. This is the first design I've uploaded online.
Please let people know in the comments if you've had success with faster/easier methods of slicing as I haven't had the opportunity to experiment much in that area.
Like and Share if you find it worthy!
Visit my Instagram for more pictures and videos!
Please credit the design if you upload your make, I'd love to share it.
https://www.instagram.com/alcatraz7007/?hl=en
Thank You!
SCALE DOWN THE STLs TO YOUR PREFERRED SIZE
THE PHOTO OF MY MAKE HAS BEEN SCALED DOWN TO 25%
For the Base
Layer Height = 0.3 mm
No Supports
Minimal Infill is sufficient
Try to maintain the speed at default so that the stilts don't break
Decrease the Top and Bottom Filled Layers to reduce time
Total Printing Time = 7+ Hours
For the Houses
Layer Height = 0.1 mm
Supports Required
Enable Print Thin Walls
Total Print Time = 11+ Hours
For the Roofs
Layer Height = 0.1 mm
Enable Print Thin Walls
Support Required
*Updated 19/08/2021*
Added Platform STL to support a battery/electronics behind the houses to the bridge.
Date published | 16/08/2021 |