Had to scale down and adjust settings to fix stringing problem with first try

Very elegant design. Thank you for sharing!

MK3 stock 0.2mm settings. material is Facilan which gives a matte white result

Very nice design :)

0.20mm

This is an amazing design. Thanks for your great work.

Nice design

Printed on CR10s-Pro with 3Dfillies PLA + transparent red.

First print on the ender 3 pro. Awesome design!

My Mother loves it! thx for the rly great Design. Printet on my CR10s Pro in .2 lh and with Trasparent pla

Printed using Eryone Rainbow Silk

That's a pretty model. Printed fine on Prusa mk3s with 0.24 layers at 30% size.Not sure if it is my slicing but the hole at the bottom is blocked. (After removing the raft of couse)

Such a cool file! Thanks for making it free to us! :) I printed it with rainbow PLA but you only really see a few colors. I think this was 0.40mm nozzle and 0.20mm layers. I don't recall what infill I used. When I printed it, I was having some nozzle issues and my retraction settings weren't so great. As a result, I ended up hitting it with my heat gun a bit too much, to get rid of the stringing, LOL. Make sure your retraction is dialed in! I would like to try printing this again now that I've fixed my printer settings and hardware. I don't think mine is water tight... That's something I'm still struggling with in general printing vases. This was scaled down very slightly, I want to say maybe 80% or so... It gets a lot of attention on my desk at work!! :)

super

super ok

Great design, prints perfectly!

I heard you and I added a little bit from myself. Currently printing this design, scaled up to 250mm height, 0.2mm layer height, 1 day 16 hours of print, at 46% now. Looks beautiful.

Scaled up to 250mm height, 0.2mm layer height, 42h print time. Stringing was easily removed using a heat gun. Material is Spectrum3D PLA Pro, deep black (RAL 9017).

Previous comment didn't have pictures for some reason. The model is scaled up to 250mm, stringing was removed using a heat gun, material is Spectrum3D PLA Pro (deep black, RAL 9017), printed at 0.2mm height, 200/60, print time 42 hours. My wife loves it!

I had a lot of stringing even after playing around with the settings (The gold one is my original attempt, the red one was my attempt after I had played around with the settings) Overall though, a super cool model.

Printed really well, some stringing that was easily removed.

Silky Copper Filament. Came out beautifully.

Silky Copper Filament. Came out beautifully.