KS5EGG4 – The Fleet of Insanity
KS5EGG4 – The Fleet of Insanity
3D
Published 2022-06-24T07:56:09+00:00
The Voidborn series of terrain and miniatures sprung forth from the madness of the Eggnog & Brains Kickstarter. Károly, Nasos, and Will crunched every spare hour between November and December to produce the models in this set. This set includes the extra skyships from the stretch goals of the campaign.
The Eggnog & Brains Kickstarter was a 100% free campaign, so these models are released for free for everyone to enjoy. 2021 was a rough year for most of planet earth, but we thrived together at Aether Studios. It was through the overwhelming support of our fans and backers that we were able to make this campaign and this set is dedicated to each and every one of them.
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
| Date published | 24/06/2022 |
| Support Free | YES |