Laser Cut Solar Charger Case
This object is currently under review. We cannot guarantee its printability just yet but this object is shareable and people with this link will be able to see and download it. If you would like to help us guarantee the printability of this object, please upload a picture of it printed.
Laser Cut Solar Charger Case
3D
Published 2020-09-10T10:21:56+00:00
This object is a solar charger case. It provides protection from drops, dirt, and some water. It is laser cut out of corrugated plastic. It is roughly 6x4x2 inches. The goal of this project is to provide a low cost but durable case for a solar charger. The solar charger is able to charge any USB device. There is a PDF file available to laser cut this object.
Solar Panel https://www.amazon.com/uxcell-142mm-Watts-Polycrystalline-Module/dp/B073SV4F9Z
Battery Holder
https://cpc.farnell.com/pro-power/pp002055/battery-holder-3x-aa-pcb/dp/BT06506
Converter
https://www.aliexpress.com/item/32732400277.html
Batteries
http://www.rayovac.com/products/rechargeables/discover.aspx
Charger Cable
https://www.amazon.com/AmazonBasics-Male-Micro-Cable-Black/dp/B0711PVX6Z/ref=asc_df_B0711PVX6Z/?tag=hyprod-20&linkCode=df0&hvadid=198093101467&hvpos=1o2&hvnetw=g&hvrand=8172653138518369435&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9007783&hvtargid=pla-359221356227&psc=1
26 in String
Tape
Laser Cutting Instructions (Epilog Zing 24)
Red lines:
Cut
20 Power
90 Speed
Pink lines:
Mark
70 Power
35 Speed
| Date published | 10/09/2020 |
| Time to do | 4 - minutes |
| Dimensions | 155mm x 100mmx50mm |
| Support Free | YES |