I made a mount for it, so i was able to fix it to some furniture

Very nice and I made one. It took 14:14 to complete. Thanks a lot for the design and also for the mount. Time lapse video of the print will be posted to my youtube channel later.

Printed in 3dJake eco PLA and then coated with resin to give it a shine/make it tough.. Fitted a light fitting with a nice bulb, looks really nice. Picture doesn't do it justice..

Soon finishing, but already see very nice thing

This was a really nice print and it comes out very smooth, so there’s not a lot of sanding required post-print. However, I would suggest trying to print without the ring because some light connections are not able to fit. Mine was slightly larger than the ring and I ended up hot gluing the fixture. Additionally, possibly including a cut out at the bottom for the wire to go through, otherwise the model cannot stand or balance on its own.

I was able to get this to work after 4 attempts. To get this to fit a Leviton lamp holder by printing it at 105% and then using a Dremel to enlarge the hole slightly. Settings used: 6 top layers, 3 walls, 4 bottom layers, 0.2mm layer height, 0.4mm nozzle, 10% infill, 50mm/s print speed, 1.2mm z hop when retracted, tree supports, 75% overhang angle, 4mm brim.

Very nice lamp model! I have customized it with low poly style. I have also split the two first fingers and printed them separately to avoid supports. Thanks!