Low Poly Sandals – Ninjaflex
3,936
views
147
downloads
1
collection
0 comments
Loading comments...
Low Poly Sandals – Ninjaflex
3D
Published 2015-05-26T15:53:24+00:00
17
0
Add to Collection
Description
Loosely inspired by Philipe Starck Tong footware-
'Low poly' form version of the sandal printed in Ninjaflex.
Left and right feet models included.
Ninjaflex can be tricky to print but these came out great after a
15 hour per foot print time. Printed on my UM 2 (standard feeder).
0.2mm, 235C @ 20mm/s.
I didn't print with supports and those overhangs are a bit lumpy, but if you can use supports that work then that would help. I would suggest a 20% infill - version shown has a 30% and are a tad stiff!
Enjoy!
Printing Details
Print at 0.2 mm layer height, with 10% infill. This uses 16 g of filament and takes 4 hours and 7 minutes.
Technical Information
Date published | 26/05/2015 |
Time to do | 247 - 257 minutes |
Material Quantity | 16 g |
Dimensions | multiple parts |
Complexity | Easy |
More Information
Object Parts