Maliwan SMG Gamerip
Maliwan SMG Gamerip
3D
Published 2017-03-29T15:31:37+00:00
After searching everywhere for this and not finding it i ripped it myself from the game and gave it a clean up which was not easy if anyone else would know if they tried ripping guns from the game.
Anyone is welcome to clean this up and re-mesh it for better poly count or slice it for printing but please link it back here for others :D
Update 27 March 17
ok so little update i cut everything into manageable parts to fit an ultimaker 2 printer
and have listed some cura estimations with the following settings
Layer height -0.2
Fill density -15%
Print head -0.4
Shell thickness -1.2
top/bottom thickness -0.6
Print speed -50
Brim -40
Support -Everywhere
Pt1 - 191g - 24Mtr - 10h 17min
Pt2 - 338g - 42.7Mtr - 18h 21min
Pt3 - 213g - 26.9Mtr - 10h 30min
Pt4 - 71g - 8.78Mtr - 4h 57min
Pt5 - 90g - 11.36Mtr - 5h 40min
Pt6 - 37g - 4.67Mtr - 2h 18min
Pt7 - 63g - 7.99Mtr - 3h 53min
Barrel 1 - 22g - 2.83Mtr - 1h 19min
Barrel 2 - 11g - 1.37Mtr - 1h 1min
total of 1036g - 130.8 Mtr - 58h 16min's
Printed high res, on edge. I also printed this laid flat, but the underside grain was ruined by the supports. I printed on edge, but still didn't get a great finish. The supports inside the small slider switch came away easily, however, I thought it was all supposed to come away, so the flaw to the switch is my error.
| Date published | 29/03/2017 |
| Time to do | 138 - 170 minutes |
| Material Quantity | 22.37g |
| Dimensions | 150 x 70 x 24 mm |
| Technology | FDM |