Mark 85 Bust - Iron Man
Mark 85 Bust - Iron Man
3D
Published 2019-12-11T15:34:17+00:00
I made a newer version of this bust and made a video about it! Chek it here: https://www.youtube.com/watch?v=uU4J-GUI9Ts
Here's a bust i made a little while ago...
Iron Man's Mark 85 armor inspired by Avengers: Endgame.
Should be an easy print, minimal support are required for the head and the shouldrs on the chest.
I originally printed the Base and Chest at 0.2mm layer height and the Helmet at 0.1 mm, that all took about 7 - 10hrs if i remember correctly.
Update 1 (13/12): The files that i had uploaded was on the wrong scale, it should be printed at 10000% to actually be 15cm in height, so i fixed that, now the shall be 15cm at 100%, but i also reoriented the Helmet and Chest for the correct orientation for FDM printing.
About the supports needed for the chest and helmet: I have used a 20º overhang, but you shoudn't use more than 25º or you wil start to add supports where is not really needed.
| Date published | 11/12/2019 |
| Dimensions | 150mm Height |
Overture PLA+ 215