MAZDA RX7 (19/27) / Air Pump add-on
MAZDA RX7 (19/27) / Air Pump add-on
Published 2021-05-19T08:44:08+00:00
This is a Air Pump add-on for the MAZDA RX7 engine.
Original engine : https://www.myminifactory.com/object/3d-print-106718
My final project :
Printed parts list (10)
1 x AirPumpBody: Layer:0.15mm Raft:no Support:yes Infill:30%
1 x AirPumpBack: Layer:0.15mm Raft:no Support:no Infill:30%
1 x AirPumpPulley: Layer :0.15mm Raft:no Support:no Infill:15%
1 x AirPumpSpacer1: Layer:0.15mm Raft:no Support:no Infill:30%
1 x AirPumpSpacer2: Layer:0.15mm Raft:no Support:no Infill:30%
1 x AirPumpPipe1: Layer:0.15mm Raft:no Support:no Infill:100%
1 x AirPumpPipe1Gasket: Layer:0.15mm Raft:no Support:no Infill:100%
1 x AirPumpPipe2: Layer:0.15mm Raft:no Support:no Infill:100%
1 x AirPumpGasket: Layer:0.15mm Raft:no Support:no Infill:100%
1 x AirPumpBracket: Layer:0.15mm Raft:no Support:no Infill:100%
Accessories (21)
2 x 6702zz bearing
2 x m2x6mm SHCS
4 x m3 lock nut
5 x m3 washer
4 x m3x8mm SHCS
1 x m3x10mm SHCS
1 x m3x27mm SHCS (cut from m3x30mm SHCS)
1 x m3x30mm SHCS
1 x m3x35mm SHCS
Assembly
Look at pictures
| Date published | 19/05/2021 |