Mechaflower Lamp (B22)
Mechaflower Lamp (B22)
Published 2021-02-22T11:54:09+00:00
I present to you a modular design inspired by
https://nidstore.com/collections/lighting/products/3d-printed-lamp-hoog
and
https://cults3d.com/en/3d-model/home/zuzanna-lamp
I found that printing the whole thing in 1 go would be impossible, especially if I wanted to keep the design open for further modifications.
With this, I could try a 2 tone setup easily and also modify the petal designs even at the final stage of slicing. Which is exactly what I have done here.
For petals I removed top and bottom fill and gave it a hexagonal infill of 35% for this effect.
Pardon the stringing, i was trying to batch print the whole 16 petals in one go.
Printer brand:
Creality
Printer:
CR-10S
Rafts:
No
Supports:
No
Resolution:
0.4
Infill:
30% for both Base and Petal
Filament brand:
Inland
Filament color:
Black, White
Filament material:
PLA
Notes:
I used hexagon infill for petals without top bottom layers.
Used 2 perimeters for strength.
The hole in the middle fit a typical b22 holder with screw threads. The initial fit of bulb might be difficult due to the pins, but this will grind down
Date published | 22/02/2021 |
Support Free | YES |