MK Series Chassis Filter Pack
$2.00 MK Series Chassis Filter Pack
Published 2019-08-16T19:00:11+00:00
This package adds full system air filtration to any MK Series chassis (chassis not included with filter pack).
This add-on filter package is 3D printed except for the filter material itself. That material is a low cost, washable open cell foam (4.8mm/3/16" thick) which can be purchased locally or online for under $3 and will provide at least two set of filters. A full Bill of Materials with expected costs can be found here. Please make sure you can obtain the filter material before purchasing this filter pack.
The filter material also has some sound deadening properties and may reduce fan and drive noise to some small extent.
More information on the MK Series 3D printed chassis and this add-on filter pack can be found at 3Dwebe.com or here on MyMiniFactory.
16 pages of documentation
Print parameters included for every object
Print time for all parts: 20 hours (Original Prusa I3 MK2/MK3, Slic3rPE)
Minimum printer build area: X:230mm Y:172mm Z:15mm
Print layer Thickness: 0.2mm
Filament types needed: PLA
| Date published | 16/08/2019 |
| Price | $2.00 |
| Time to do | 1200 - minutes |
| Material Quantity | PLA: 210g |
| Dimensions | 165.23mm x 153.17mm x 10.2mm |
| Support Free | YES |
Yes, these filters do work...My own MK735, time to rinse the filters.