Phone Stand QI
Phone Stand QI
3D
Published 2018-09-18T17:11:47+00:00
Designed to house a round 7cm QI charger and fit a Samsung Galaxy S7 both vertical and horizontal even with a protector. Distance between the upper prongs are 74mm so it should work with any phone longer and/or slimmer than that. The stand also works if you prefer charge your phone by plugging it in.
I bought my QI pad from ebay, its not sold anymore but it looks like this one https://www.banggood.com/Q5-Wireless-Charger-Pad-Qi-Standard-Transmitter-White-Chassis-For-Phone-p-974659.html
The MainOP is the one im using is made to be a snug fit with the OnePlus microUSB cable. I made the MainL with a larger hole that should have a better chance to fit other cables.
QiRing is there to hold the QI charger in place.
Printed it in semi transparent so I can see the QI chargeindicator. 0.15 layerhight with 0.2 first layer, 2 perimiters (i did 20% infil by mistake you probably dont need much if any).
Took something around 6 hours to print.
| Date published | 18/09/2018 |
| Time to do | - 6 minutes |
| Material Quantity | 67g (Cura Calculation) |
| Support Free | YES |