Montini Lamassu Winged Bull Wall Set (Lego Compatible)
Montini Lamassu Winged Bull Wall Set (Lego Compatible)
Published 2020-07-20T12:33:17+00:00 • Remixed from Montini building bricks Female Plate Set (Lego Compatible), Montini building bricks Two Pip Set (Lego Compatible), Montini building bricks Pip Strip Set (Lego Compatible)
This set of Montini bricks forms a relief showing a five legged lamassu.
Just like the vintage original Montini parts, these are compatible with classic Lego full height bricks.
Montini building bricks were produced from 1961 to 1969 in the Netherlands. They were originally made from soft, pliable polypropylene. The diagonal fins bend slightly around the pips of the other block.
puppenhausmuseum.de/montini-bausteine.html
Please do not mix these with original Montini parts. PLA is much harder than the original bricks, and the layer ridges act like sand paper. You will wear out the original Montini bricks very quickly.
I would love to see your make!
Original art scan:
https://sketchfab.com/3d-models/lamassu-winged-human-headed-bull-f4f5eaef0db041478833aad26ebb08ac
Printer brand: Prusa
Printer: i3 MK3
Rafts: No
Supports: Yes
Resolution: .15
Infill: 25
Notes:
These are optimized for a 0.4mm nozzle. They are friction fit parts, so tolerances are important. I set the Horizontal Shells Top to 7, and Bottom to 10 to allow for the relief to have infill, but the brick to be solid. In Slic3r PE I set "Elephant foot compensation" to 0.07.
These parts need supports: 0_0_Lamassu.stl 0_7_Lamassu.stl 1_6_Lamassu.stl 2_0_Lamassu.stl 2_4_Lamassu.stl 2_7_Lamassu.stl 2_8_Lamassu.stl 2_9_Lamassu.stl
Date published | 20/07/2020 |