MyRCBike Adventure 1/5 RC Bike, Part 2: Bike Body, Rider and "Flying Wheels"
MyRCBike Adventure 1/5 RC Bike, Part 2: Bike Body, Rider and "Flying Wheels"
3D
Published 2021-12-22T09:59:52+00:00
You can also see first version of the bike in action in the next video:
It looks like you are a great adventurer!
Old Price without discount: 60
With the parts in this publication you will be able to add the motorbike body, the ugly rider and the "Flying Wheels", those little side wheels to help riding the bike, so when you finish adding them, your build should look like the one in the main photo, probably quite more beautiful.
Remember you can find more info in the original publication
If you have the right sourced wheels, it is time to give it a try to your build! I can remember my first try, my right hand, trembling non-stop because i didn't know if the bike could even steer :S I think thanks to the "SACSSSS" those crazy little moves from my hand didn't affect so much to the bike...
The main idea for this Adventure is you will have to print, build and show "Part 1" to have a huge discount for "Part 2", and you will have to do the same with "Part 2" to have access to "Part 3". If you don't want to print and show your build, probably these three publications are not for you.
If this design some day is enough welcomed I will generate quite more info about assembly, gearing options and better explaining drawings and so on, but for now, you will have to take it just like kind of a puzzle. I list here the parts included in this publication, so you can get a better idea of what you are getting.
You can notice in the next list how many to print of each part, the same than if supports are needed or if it is a part to be printed in TPU.
Body Parts
- 1 Main Front (TPU) (needs supports)
- 1 Main Front with WindShield (TPU) (needs supports)
- 1 Main Fuel Tank (TPU) (needs supports)
- 1 Main Rear (TPU) (needs supports)
- 1 Windshield (Transparent) (needs supports)
- 1 MudGuard Front (needs supports)
- 1 MudGuard Rear (needs supports)
Rider Parts
- 1 Rider Seat
- 1 Rider Top (TPU) (needs supports)
- 1 Rider Bottom (TPU) (needs supports)
- 1 Rider Helmet WindShield
- 1 Rider ButtPlug (TPU)
Flying Wheels
- 2 Flying Wheels Main Body (TPU) (Use symmetry for right part)
- 2 Flying Wheels Half Sphere Wheel(TPU)
- 2 Flying Wheels Spacer
You can find the "Complete List of Hardware Needed" in the MyRCBike Adventure Part 1 Publication
I hope with this and your extra effort we can take this design to the next level, probably something almost professional but a lot cheaper than the conventional hobby, with unlimited spares just some cliks away ;)
Thank you for reading and welcome to this new MyRCBike Adventure! will you reach the next level?
IMPORTANT INFO
As an extra security measure, my best designs are PASSWORD PROTECTED. After purchasing and downloading you will need to write me a short Private Message so I can give you the password as soon as possible. Please, give me 12h to reply your email.
I have created a Discord Server to help those of you who buy my designs and want to give some feedback! If you want I can invite you and we can chat there, just let me know! :)
| Date published | 22/12/2021 |
It's coming together nicely. The body is made of PETG. We'll see how well it hold's up. Now the driver's next and then some paint.