N1 Purse
Featured
Exclusive
9,669
views
840
downloads
13
collections
Add to collection
131
6
6 comments
Loading comments... 
N1 Purse
Published 2017-05-29T05:19:29+00:00
OR
Save for later
Description
My first purse design. Easy to print without support.
Print parts: prs1 - 2 pcs. prs2a - 4 pcs. prs2b - 4 pcs.
Use 10x2mm round magnets to make clasp and cooper wire to make strap attachment.
If you like my free designs checkout my:
International shop
Shapeways shop
Homepage
Facebook profile
YouTube channel
If you any questions just message me here or by email: sebastian.wac@gmail.com
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
This design has been released exclusively on MyMiniFactory as part of the MMF Studios program! Learn more here!
Printing Details
Layer thickness: 0,19mm Infill: Maximum
Technical Information
| Date published | 29/05/2017 |
| Time to do | - 1013 minutes |
| Material Quantity | 162g |
| Dimensions | (mounted) 194 x 141 x 26mm |
| Technology | FDM |
| Support Free | YES |
Object Parts
I made a second version of the purse - my girlfriend wanted a larger one so I scaled it up by 20% Then I uploaded the file to Meshmixer and removed all the tile pieces leaving the outer flanges. Those I filled in the holes then simply increased the Z height to 10 MM in Cura before printing. These pieces added the extra width to the interior of the bag that I needed. I used super glue to bond the pieces then a soldering iron to bond them further. Printed at 0.2 mm on my Anet E10 using PLA